Start/Rim sticker “SONS”
Sons of Battery - E-MTB Brand & Community
Rim sticker “SONS”
€15,40inkl. MwSt., zzgl. Versand
Colors
Black (gloss)
Sichere Zahlung
Frag uns per WhatsApp
Fragen, melde dich direkt!
Auf Lager — versandfertig in 24 Stunden
Beschreibung
Rim sticker (film) in unisex, suitable for 29 and 27.5 inches!
Pack of 4 (4 individual films) as shown in the picture! 4 slides!
W: 18.9 cm
H: 2 cm (letter)
It comes in one piece but can be cut up to glue perfectly!
It comes cut into 2 parts each, you still have to separate them! (Has to do with the letter thickness..)
Danger:
Due to the handwork, delivery of the films can take 5-10 working days!
ATTENTION: The rim films have major problems with DT Swiss XM 1700 / or DT Swiss rims, which seem to be coated differently and the films have major problems sticking!
Attention 2: Reflective film does not replace the cat's eye under any circumstances! It is used to decorate your bike!
Attention: The assembly requires a grease-free and cleaned rim, and it also requires a little skill, so if your paws have problems with the Panini pictures in your scrapbook, give the foils directly to someone with more sensitivity :D
The film comes in one piece, you may want to trim it a little for better processing! Due to the unisex unit and the lack of 2 different adhesives, the bend is not 100% perfect (minimal) But that is the compromise of the unisex solution! That's why we recommend that if you want it to be perfect, stick the letters individually!!
Tip for a perfect result: Cut them into individual letters so you can put it perfectly yourself!
Tip for a perfect result: Cut them into individual letters so you can put it perfectly yourself!
Attention 2: Reflective film does not replace the cat's eye under any circumstances! It is used to decorate your bike!
- Reflection class: RA1/A
- Colors: black (not CE compliant)
- Shelf life: 7 years
- Standards: BASt approval and CE certified (all colors except black), DIN 67520, DIN 6171
- permanently adhesive
- 0.13mm thick
- No edge sealing necessary. Bonding on flat or slightly curved surfaces. The surface to be glued must be free of dust, grease or other contaminants that could impair the adhesive strength of the material. New paintwork must be dried or completely cured for at least three weeks. To determine compatibility, application tests must be carried out with the intended paints. The self-adhesive reflective material may only be glued dry! The low tear resistance of the material can make it difficult to remove the reflective film.
Cleaning is important!!
Of course the foils cannot be exchanged...
We assume no liability for damage to anything that is glued!
Versand & Rückgabe
- Folien Versandfertig in 24 Stunden
- Gratis Versand ab 150 €
Montage
Fläche entfetten, Folie mittig ansetzen, von der Mitte nach außen andrücken. Bei Bedarf mit einem Föhn leicht erwärmen.